Všechny objednávky, které k nám dorazí před 16:30, jsou odesílány ve stejný den – bez ohledu na to, jaký typ doručení jste zadali
Pokud chcete platit v PLN, zadejte prosím svou objednávku a vyberte platbu převodem v PLN. Částka k úhradě se převede podle aktuální směnný kurz NBP.
60 MM ACTUATOR STROKE
REALISM AND IMMERSION OF THE SIMULATION
In sim racing, the actuator stroke refers to the range of motion or travel that a motion actuator or motion platform is capable of producing. Motion actuators are devices that are often used in sim racing setups to provide physical feedback and simulate the sensations of acceleration, braking, cornering, and other movements experienced in real-world driving.
The actuator stroke determines how far and in what directions the motion platform or seat can move. For example, it may refer to the maximum distance the seat can move forward and backward, tilt side to side, or pitch up and down. The stroke length can vary depending on the specific motion platform or simulator hardware being used. Having a sufficient actuator stroke is important in sim racing because it directly impacts the realism and immersion of the simulation. A 60 mm/2.36 in stroke allows for a wider range of motion and can provide a more accurate representation of the forces experienced in a real vehicle. This can make the driving experience in the simulator feel more authentic and responsive, enhancing the overall immersion for the sim racer.
PLUG&PLAY
SIMPLE AND HASSLE-FREE SETUP PROCESS
The installation of the QS-210 motion system is exceptionally straightforward. You can have it up and running within minutes. Attaching the four actuators to your aluminum cockpit is a breeze, thanks to the included mounting brackets that come with the motion set. To streamline the process further, you can easily download the Qubic Manager software with just one click, and it’s completely free of charge. Utilizing the step-by-step tutorial, you’ll effortlessly configure the system to your specific preferences. The motion system only requires a power supply of 115/230 VAC. In practically no time at all, you’ll be fully prepared to engage in thrilling races.
ENHANCE STABILITY
PRECISION AND CUSTOMIZATION IN SIMRACING
The QS-210 3DoF motion set equipped with dedicated brackets allowing precise customization for an immersive racing adventure. These adaptable brackets seamlessly integrate actuators into popular aluminum based cockpits, delivering unwavering stability and an exhilarating virtual racing experience.
MOUNTING OPTIONS
DISCOVER TWO WAYS OF QS-210 MOUNTING BRACKETS ASSEMBLY
Discover how quickly and conveniently you can mount the QS-210 set to your cockpit. Whether you prefer the first mounting option for a simple setup or the second option for greater versatility, the QS-210 brackets provide hassle-free motion platform installation to suit your needs.
QS-210 3DOF MOTION SET CONSISTS:
BOX DIMENSIONS:
BOX WEIGHT:
QS-MC6 CONTROLLER SET:
BOX DIMENSIONS:
BOX WEIGHT
60 MM ACTUATOR STROKE
REALISM AND IMMERSION OF THE SIMULATION
In sim racing, the actuator stroke refers to the range of motion or travel that a motion actuator or motion platform is capable of producing. Motion actuators are devices that are often used in sim racing setups to provide physical feedback and simulate the sensations of acceleration, braking, cornering, and other movements experienced in real-world driving.
The actuator stroke determines how far and in what directions the motion platform or seat can move. For example, it may refer to the maximum distance the seat can move forward and backward, tilt side to side, or pitch up and down. The stroke length can vary depending on the specific motion platform or simulator hardware being used. Having a sufficient actuator stroke is important in sim racing because it directly impacts the realism and immersion of the simulation. A 60 mm/2.36 in stroke allows for a wider range of motion and can provide a more accurate representation of the forces experienced in a real vehicle. This can make the driving experience in the simulator feel more authentic and responsive, enhancing the overall immersion for the sim racer.
PLUG&PLAY
SIMPLE AND HASSLE-FREE SETUP PROCESS
The installation of the QS-210 motion system is exceptionally straightforward. You can have it up and running within minutes. Attaching the four actuators to your aluminum cockpit is a breeze, thanks to the included mounting brackets that come with the motion set. To streamline the process further, you can easily download the Qubic Manager software with just one click, and it’s completely free of charge. Utilizing the step-by-step tutorial, you’ll effortlessly configure the system to your specific preferences. The motion system only requires a power supply of 115/230 VAC. In practically no time at all, you’ll be fully prepared to engage in thrilling races.
ENHANCE STABILITY
PRECISION AND CUSTOMIZATION IN SIMRACING
The QS-210 3DoF motion set equipped with dedicated brackets allowing precise customization for an immersive racing adventure. These adaptable brackets seamlessly integrate actuators into popular aluminum based cockpits, delivering unwavering stability and an exhilarating virtual racing experience.
MOUNTING OPTIONS
DISCOVER TWO WAYS OF QS-210 MOUNTING BRACKETS ASSEMBLY
Discover how quickly and conveniently you can mount the QS-210 set to your cockpit. Whether you prefer the first mounting option for a simple setup or the second option for greater versatility, the QS-210 brackets provide hassle-free motion platform installation to suit your needs.
QS-210 3DOF MOTION SET CONSISTS:
BOX DIMENSIONS:
BOX WEIGHT:
QS-MC6 CONTROLLER SET:
BOX DIMENSIONS:
BOX WEIGHT
víme přesně
Ambasadoři naší značky jsou aktivními piloty v reálném životě a testují vybavení, které poskytujeme našim zákazníkům!
Maresto Polska Sp. z o. o.
Baletowa 40, 02-867, Warsaw
VAT ID: PL 7010408686
REGON: 147055671
KRS: 0000493326
Share capital 1 000 440 PLN
!